Fullpints new toy.....

[Guest]

Was not sure if I should post this is the bike section or car!!!!!
I will post some pics over the weekend (after she's been claened to my standard) but for now here is the spec;

Mk Indy Blade 2004 with a 919 Fireblade lump;
2004 registered MK Indy-blade
919 (98) blade engine
The usual MK spec
Aloy paddle shift system with gear cable
3.6 diff fitted with spare 3.9
Nearly new TSW modena's with new tyres
Koso digidash
919cc fireblade engine running sweet
Needled and jetted correctly
Cobra bucket seats with yellow piping
Dominator headlights
Cobrta 7's with yellow piping
Polycarbonate fly-screen
Recently balanced carbs
greensuff front pads. sierra rear drums
reconditioned steering rack with billet alloy clamp

[fullpint]

Was not sure if I should post this is the bike section or car!!!!!
I will post some pics over the weekend (after she's been claened to my standard) but for now here is the spec;

Mk Indy Blade 2004 with a 919 Fireblade lump;
2004 registered MK Indy-blade
919 (98) blade engine
The usual MK spec
Aloy paddle shift system with gear cable
3.6 diff fitted with spare 3.9
Nearly new TSW modena's with new tyres
Koso digidash
919cc fireblade engine running sweet
Needled and jetted correctly
Cobra bucket seats with yellow piping
Dominator headlights
Cobrta 7's with yellow piping
Polycarbonate fly-screen
Recently balanced carbs
greensuff front pads. sierra rear drums
reconditioned steering rack with billet alloy clamp

[Username taken]

  Look forward to seeing that round Combe.

[fullpint]

I must get that screen replaced tho.. It looks 

[halfpint]

Steve just took me out in his new toy and bloody hell best car ride i have ever had. Mega Mega smile on your face fun. AWESOME!!!!!!!!!!!!!!!!

[fullpint]

Just ordered my sign writing for the car. Should be here on Tuesday and will hopefully have it on the car before Weds 

[fullpint]

First bit to get the TPCS powder coating treatment was my 'flappy-paddle' thingy..
I s was semi-blasted alloy finish so I thought lets give it a proper blast and powder coat it in my Gloss White 

This is just the start I feel 

[Jamie86]

Nice, i'm in corsham a fair bit now if you wanna take me for a spin 

[fullpint]

Only when its dry mate otherwise it will be a Spin 

[fullpint]

Forecast this morning was dry  So I pushed the Sei out the way and fired up the Mk Indy. Got to work just fine.. Settled down and started to paint5 wheels......
Then I looked out side and  is  down.. Made a dash for my gazebo side and managed to make a little cover for her.. I took a pic and will post it shortly
Stilo will be used for tomorrow I think.

[fullpint]

I had a vibration under braking. Coming from the right side
Upon grabing the top wishbone it had play in it! The locking nut was only loose  This then lead me to check ALL the bolts. I found a few (major) that needed a good half a turn on them. Car handles a lot better under braking now.
RWD:::::::::::  Great fun pulling out of a junction. Rear wheels light-up with ease and the rear end drifts out 
The car now has its TPCS decals on and looks 
Next week I should be getting my first batch of stickers to give away.
Here's the BEC with her decals;

[fullpint]

Took the car up to Kevill airfield on Saturday . They had an open track day so i thought lets pop up and get a sound check done 
 
The guy said its 50% over there 100db limit.. Came in at 115db which is far tooooooo loud for any track
Gonna have to re-pack (or replace) the end can to see if I can get it below 100db before taking it out on track..
Bummer cause I need an open space to play around with that RWD and learn how to control a drift  Done a couple now but you could end up in trouble if you are not careful 

[Jamie86]

115db's Is redicoulsy loud 

[fullpint]

At least you can hear me coming................... from ten miles away 

[fullpint]

I'm loving this mild weather... Means I get to use my bike (or is it a car) at the weekend. Went for a fuel top up which means if its nice tomorrow I can go and use it up 

[fullpint]

  ive been powder coating again.... Will post pics when I get the front end back together today...